Select a Color
Simply select A, B, or C to choose your perfect color.
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
The expansive, dramatic skies add saturation to the wide-ranging palette.
The warmth of the palette also reflects the flowering hues of springtime.
From the deep blues of the mountain ranges to the brightly colored flora and fauna, this ecoregion also boasts highly saturated primary colors.
The warms and cools of this palette are uniformly vibrant and saturated.
This set of nine neutral colors is meant to complement the other palettes.
ECOS Original Colors
Do I Need A Primer?
Some colors, especially yellows, reds and oranges, and other dark accent colors, are considered by the paint industry to be “poor hiding” colors. That means they usually need a primer because, despite their strong, vibrant color, they’re not good at hiding the color they’re covering.
Using a grey or tinted primer can help you avoid having to apply multiple coats of paint to get the color you want. A tinted primer will help prepare the existing surface for your color. After that, you’ll typically only need to apply two coats of paint to get that perfect result.
At ECOS, we can help you tell which colors need a primer. Click here to print a zig-zag patterned paint card you can use to test your paint sample. Apply two coats of paint over the pattern. If you can still see the pattern through the paint, you’ll get better results if you use a grey or tinted primer under your color.
Painting Tips to Improve “Hide"
- Always choose a high-quality paint like ECOS.
- If you have multiple cans of the same color, combine them before you start to paint.
- Always stir paint thoroughly before painting.
- Don’t thin or dilute the paint with water.
- Use the correct primer as described above, or when you’re applying paint over a porous surface.
- Don’t spread the paint too thinly or unevenly.
- Allow the recommended drying time between coats.
- Always use high-quality brushes, rollers, and other tools.
Interior Anti-Slip Floor Paint
Anti-slip Floor Paint is a self-priming, medium sheen, durable floor paint which is lightly textured to provide an anti-slip surface. Odorless, non-toxic, and VOC-free.
- Product Code: 700355463634
- Availability: In Stock
Steps to Purchase
Colors on screen do not necessarily provide an accurate representation. Getting a sample or free chip is recommended prior to ordering.
2) Choose Quantity: Calculate Coverage
3) Add to Cart:
ECOS Anti-Slip Interior floor paint is a finely-textured, semi-gloss floor paint for use on bare and previously painted wooden and concrete floors (not subject to water pooling). Anti-slip paint can be applied in areas that see a lot of use. From hallways to entryways, anti-slip paint can help reduce surface slickness. Our paint products are designed to be more environmentally friendly and odor free. For those seeking a quality textured floor paint that doesn't emit the harmful fumes typically found in traditional paints, shop non-slip paints at ECOS today.
- ✔ Zero VOC1
- ✔ No Odor2
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
Interior Anti-Slip Floor Paint
|Preparation||Surfaces should be clean, dry, sound, and free from dirt, dust, grease, and loose or flaking material. Clean stubborn areas with mild detergent. Rinse and dry thoroughly before painting. Unpainted (or unfinished) surfaces should first be primed to ensure an even base color and consistency, before applying the paint.|
|Application and Clean Up||Under most conditions thinning is not necessary. Stir gently before and during use. Intermix if using multiple containers to ensure color uniformity. Best results are achieved with three coats. Typically dries to the touch in two hours and can be recoated in twenty four. Hardening continues for up to thirty days. Avoid wetting, or scuffing during this period. Can be applied using a good quality synthetic brush; or rolled using a shed resistant 3/8"-1/2" roller cover. Avoid applying below 50oF.|
|Coverage||400 sq. ft. per gallon|