ECOS Paints Air Purifying Paint
  • Air Purifying Paint

Air Purifying Paint

    VOC-neutralizing coating, available in four sheens. Ideal for walls, ceilings, trim, furniture, and other woodwork.
    More Details
  • Product Code: 700355463641
  • Availability: In Stock

Options

$42.65 / Each
$98.95 / Each
How much do I need?
Purchase an un-tinted sample of this product here

  • $0.00

ECOS Air Purifying Paint is a protective finish that dries to a hard, durable film. Ideal for exterior walls, furniture, and trim, and all interior rooms including kitchens and bathrooms. Atmosphere Purifying Paint adsorbs and neutralizes chemicals and pollutants, solvents and VOCs, for improved indoor air quality.

  • ✔ Zero VOC1
  • ✔ No Odor2

 


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.

Air Purifying Paint

Typical coverage per gallon:
500 sq. ft.
Recommended coats:
2

Coverage Calculator

Height
Width
Surface 1
ft.
ft.
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. ECOS Paint is self-priming on most properly prepared surfaces, but we recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color.
Application and Clean Up Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50oF. For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water.
Coverage 500 sq. ft. per gallon
Recommended coats 2
Product Code 700355463641

Shipping Estimate

Country:
Region / State:
Post Code: