ECOS Masonry Primer
Orders over $100 ship FREE / Staying at home? Skip the hardware store & add a painter's kit to your order
  • Masonry Primer

Masonry Primer

    Masonry Primer is a strong-bonding primer ideal for interior and exterior bare masonry, cement, or concrete. Odorless, non-toxic, and VOC-free....More Details

    • Shipping Estimate
    • Application Instructions
    • FAQs

  • Product Code: 700355463955
  • Availability: In Stock

 Steps to Purchase

(Click below to select)
2) Choose Quantity: 
$34.95 / Each
$66.95 / Each
$319.95 / Each
Purchase an un-tinted sample of this product here

3) Add to Cart: 
  • $0.00

ECOS masonry primer is ideal for use on interior and exterior bare masonry, cement, or concrete. It provides a suitable bonding surface for paint and adds an extra layer of protection. Priming is highly recommended, especially if the surface is not waterproof, or is made of porous materials. Before applying the masonry primer make sure the surface being coated is in sound condition. Masonry primer will not remedy any structural, or surface issues.

  • ✔ Zero VOC1
  • ✔ No Odor2
  • ✔ Non-Toxic3

 


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
  • 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

Masonry Primer

Typical coverage per gallon:
400 sq. ft.
Recommended coats:
1

Add all surfaces to be painted then remove openings, like doors and windows

Coverage Calculator

Height
Width
Surface 1
ft.
ft.
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Surfaces should be clean, dry, sound, and free from dirt, dust, grease, and loose or flaking material. Clean stubborn areas with mild detergent. Rinse and dry thoroughly before priming. Soft or crumbly substrates should be pre-treated.
Application and Clean Up Under most conditions thinning is not necessary. Stir gently before and during use. Generally requires only one coat. Normally dries to the touch within one hour. Allow four hours before painting. Can be applied using a good quality synthetic brush; or rolled using a shed resistant 1/4"-3/8" roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Avoid applying below 50oF.
Coverage 400 sq. ft. per gallon
Recommended coats 1
Product Code 700355463955