Lullaby Gloss Paint | Lullaby Paints
Orders over $100 ship FREE | NEW: Holiday Ornament Painting Kits
  • Lullaby Gloss Paint

Lullaby Gloss Paint

    High-sheen, durable finish ideal for furniture, trim, and other woodwork. One quart typically covers a standard sized crib....More Details

    • Shipping Estimate
    • Application Instructions
    • FAQs

  • Product Code: 817292020322
  • Availability: In Stock

 Steps to Purchase

1) Choose Color: 

Colors on screen do not necessarily provide an accurate representation. Getting a sample or free card is recommended prior to ordering.

Do I need a primer for this color?

2) Choose Quantity: 
$37.95 / Each
$84.95 / Each
Purchase an un-tinted sample of this product here
  • $0.00

3) Add to Cart: 

Lullaby gloss paint is a high sheen, protective finish that dries to a hard, durable film.Ideal for interior or exterior walls & ceilings, woodwork, trim, and furniture such as cribs and changing tables.

  • ✔ Zero VOC1
  • ✔ No Odor2
  • ✔ Non-Toxic3


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
  • 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

Lullaby Gloss Paint

Typical coverage per gallon:
400 sq. ft.
Recommended coats:

Add all surfaces to be painted then remove openings, like doors and windows

Coverage Calculator

Surface 1
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. We recommend using one of our primers if painting over a higher gloss finish, a darker color, applying an accent color, or applying over bare or heavily sanded surfaces. When painting a previously finished piece of furniture (painted, stained, clear coated) it is important to remove the existing finish sufficiently for the new coating to bond. Factory finished pieces will need to be sanded down to the bare wood and then primed. Powder coated pieces cannot be re-painted. Painting onto smooth, impermeable surfaces will result in a peeling or cracking finish.
Application and Clean Up Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50oF. For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water.
Coverage 400 sq. ft. per gallon
Recommended coats 2
Product Code 817292020322