ECOS Paints Anti-Formaldehyde Radiator (AFR) Paint
  • Anti-Formaldehyde Radiator (AFR) Paint

Anti-Formaldehyde Radiator (AFR) Paint

    Anti-Formaldehyde Radiator (AFR) paint is ideal for coating hot water radiators prior to painting. This paint absorbs VOCs, including formaldehyde (which can off-gas from conventional central heating radiators) before they escape into the air. Odorless, non-toxic, and VOC-free. Not suitable for steam or electric storage radiators.
    More Details
  • Product Code: 700355463627
  • Availability: In Stock

 Steps to Purchase

1) Choose Color: 

Colors on screen do not necessarily provide an accurate representation. Getting a sample or free chip is recommended prior to ordering.


2) Choose Quantity: 
$45.65 / Each
$98.95 / Each

3) Add to Cart: 
  • $0.00

ECOS Interior Anti-Formaldehyde Radiator (AFR) paint is ideal for coating hot water radiators prior to painting. ECOS Interior AFR paint adsorbs VOCs, including formaldehyde (which can off-gas from conventional central heating radiators) before they escape into the air. Not suitable for steam, or electric storage radiators which run at even higher temperatures and require specialized finishes.

  • ✔ Zero VOC1
  • ✔ No Odor2

 


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.

Anti-Formaldehyde Radiator (AFR) Paint

Typical coverage per gallon:
500 sq. ft.
Recommended coats:
3

Coverage Calculator

Height
Width
Surface 1
ft.
ft.
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. ECOS Paint is self-priming on most properly prepared surfaces, but we recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color.
Application and Clean Up Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50oF. For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water.
Coverage 500 sq. ft. per gallon
Recommended coats 3
Product Code 700355463627