Select a Color
Simply select A, B, or C to choose your perfect color.
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
The expansive, dramatic skies add saturation to the wide-ranging palette.
The warmth of the palette also reflects the flowering hues of springtime.
From the deep blues of the mountain ranges to the brightly colored flora and fauna, this ecoregion also boasts highly saturated primary colors.
The warms and cools of this palette are uniformly vibrant and saturated.
This set of nine neutral colors is meant to complement the other palettes.
ECOS Original Colors
Do I Need A Primer?
Some colors, especially yellows, reds and oranges, and other dark accent colors, are considered by the paint industry to be “poor hiding” colors. That means they usually need a primer because, despite their strong, vibrant color, they’re not good at hiding the color they’re covering.
Using a grey or tinted primer can help you avoid having to apply multiple coats of paint to get the color you want. A tinted primer will help prepare the existing surface for your color. After that, you’ll typically only need to apply two coats of paint to get that perfect result.
At ECOS, we can help you tell which colors need a primer. Click here to print a zig-zag patterned paint card you can use to test your paint sample. Apply two coats of paint over the pattern. If you can still see the pattern through the paint, you’ll get better results if you use a grey or tinted primer under your color.
Painting Tips to Improve “Hide"
- Always choose a high-quality paint like ECOS.
- If you have multiple cans of the same color, combine them before you start to paint.
- Always stir paint thoroughly before painting.
- Don’t thin or dilute the paint with water.
- Use the correct primer as described above, or when you’re applying paint over a porous surface.
- Don’t spread the paint too thinly or unevenly.
- Allow the recommended drying time between coats.
- Always use high-quality brushes, rollers, and other tools.
Filler powder is the ideal filler suitable for filling holes or covering joints in both large and small areas. The white powder mixes easily to a smooth consistency, which dries to an easy-to-sand finish. Odorless, non-toxic, and VOC-free.
- Product Code: 700355463733
- Availability: In Stock
Steps to Purchase1) Choose Quantity: Calculate Coverage
2) Add to Cart:
ECOS Filler Powder is the ideal filler suitable for a variety of jobs, even large areas. The white powder mixes easily to a smooth consistency, which dries to an easy to sand finish. Special binders give excellent adhesion. Use to fill holes, cover joints, etc.
- ✔ Zero VOC1
- ✔ No Odor2
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
Add all surfaces to be painted then remove openings, like doors and windows
|Preparation||Ensure crack or hole is dry and free from loose or dusty material. Touch up any nails and screw heads with two-coats of ECOS Stainblock, to avoid ruststaining. WARNING: Older buildings may contain lead-based paint, which requires professional remediation if it is disturbed. If in doubt, consult with a professional from a Lead-Safe Certified Firm.|
|Application and Clean Up||Mix 2 parts Filler with 1 part water (approx) to a smooth paste. The filler is ready for use in about one minute and remains workable for more than 20 minutes. Press filler paste into hole with a filling knife/trowel. Fill the hole slightly proud. Sand, when fully dry, to a smooth flat surface and brush/wipe free of dust. Special easysand formula! Normally sets fully in around 1 to 2 hours. Before painting, seal with one coat of ECOS Filler-Sealer and allow to dry fully. Clean bowl and tools with warm water. Do not wash excess material into drains, but allow to dry on paper, then dispose of as household trash.|
|Coverage||400 sq. ft. per gallon|