ECOS Premium Wood Primer - Primer for Wood
  • Wood Primer

Wood Primer

    Wood Primer is a strong-bonding primer ideal for trim, furniture, cabinets, and other interior/exterior woodwork. Odorless, non-toxic, and VOC-free....More Details

    • Shipping Estimate
    • Product Questions
    • FAQs

  • Product Code: 700355463955
  • Availability: In Stock

 Steps to Purchase

(Click below to select)
2) Choose Quantity: 
$32.95 / Each
$62.95 / Each
$314.75 / Each
Purchase an un-tinted sample of this product here

3) Add to Cart: 
  • $0.00

ECOS wood primer is ideal for use on interior and exterior bare woodwork. It provides a suitable bonding surface for paint and adds an extra layer of protection to your floor. Priming a floor is highly recommended, especially if it's not waterproof, can't be cleaned, or made of porous materials. Our wood primer ensures that your floor is sealed and protected. Before you paint your floor, make sure it's primed with ECOS premium interior wood primer.

  • ✔ Zero VOC1
  • ✔ No Odor2
  • ✔ Non-Toxic3

 


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
  • 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

Wood Primer

Typical coverage per gallon:
400 sq. ft.
Recommended coats:
1

Add all surfaces to be painted then remove openings, like doors and windows

Coverage Calculator

Height
Width
Surface 1
ft.
ft.
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Surfaces should be clean, dry, sound, and free from dirt, dust, grease, and loose or flaking material. Clearn stubborn areas with mild detergent. Rinse and dry thoroughly before painting. Soft or crumbly substrates should be pre-treated.
Application and Clean Up Under most conditions thinning is not necessary. Stir gently before and during use. Intermix if using multiple containers to ensure color uniformity. Generally only requires one coat. Sand lightly between coats as this product may raise the grain of the wood. Normally dries to the touch in one hour. Allow four hours before sanding or painting. Can be applied using a good quality synthetic brush; or rolled using a shed resistant 1/4"-3/8" roller cover. Avoid applying below 50oF.
Coverage 400 sq. ft. per gallon
Recommended coats 1
Product Code 700355463955