Select a Color
Simply select A, B, or C to choose your perfect color.
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
The expansive, dramatic skies add saturation to the wide-ranging palette.
The warmth of the palette also reflects the flowering hues of springtime.
From the deep blues of the mountain ranges to the brightly colored flora and fauna, this ecoregion also boasts highly saturated primary colors.
The warms and cools of this palette are uniformly vibrant and saturated.
This set of nine neutral colors is meant to complement the other palettes.
ECOS Original Colors
Do I Need A Primer?
Some colors, especially yellows, reds and oranges, and other dark accent colors, are considered by the paint industry to be “poor hiding” colors. That means they usually need a primer because, despite their strong, vibrant color, they’re not good at hiding the color they’re covering.
Using a grey or tinted primer can help you avoid having to apply multiple coats of paint to get the color you want. A tinted primer will help prepare the existing surface for your color. After that, you’ll typically only need to apply two coats of paint to get that perfect result.
At ECOS, we can help you tell which colors need a primer. Click here to print a zig-zag patterned paint card you can use to test your paint sample. Apply two coats of paint over the pattern. If you can still see the pattern through the paint, you’ll get better results if you use a grey or tinted primer under your color.
Painting Tips to Improve “Hide"
- Always choose a high-quality paint like ECOS.
- If you have multiple cans of the same color, combine them before you start to paint.
- Always stir paint thoroughly before painting.
- Don’t thin or dilute the paint with water.
- Use the correct primer as described above, or when you’re applying paint over a porous surface.
- Don’t spread the paint too thinly or unevenly.
- Allow the recommended drying time between coats.
- Always use high-quality brushes, rollers, and other tools.
Wood Glue is a strong-bonding glue ideal for interior woodwork, joinery, wooden floor tiles, laminates, floorboards, cork sheeting and tiles. Can also be used for paper, card, carpet, fabric, Odorless, non-toxic, and VOC-free. Not suitable for teak or other oily woods or asphalt-sealed surfaces....More Details
- Shipping Estimate
- Product Questions
- Product Code: 700355463948
- Availability: In Stock
Steps to Purchase1) Choose Quantity: Calculate Coverage
2) Add to Cart:
Ideal for interior woodwork, joinery, wooden floor tiles and laminates, floorboards, cork sheeting and tiles. Can also be used for paper, card, carpet, fabric, etc.
Can be used on unsealed chipboard, hardboard, cement-screed and concrete substrates. Not suitable for teak or other oily woods or asphalt-sealed surfaces.
- ✔ Zero VOC1
- ✔ No Odor2
- ✔ Non-Toxic3
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
- 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.
Add all surfaces to be painted then remove openings, like doors and windows
|Preparation||Ensure that the surfaces to be joined are clean, dry, non-dusty and free of oil and wax. Previously varnished surfaces can also often be joined, but a thorough rub down with emery/glass paper is essential and a test area is advised. Dusty concrete/cement floors may need to be sealed - ask for advice.|
|Application and Clean Up||Flooring: Best applied to the substrate with a notching tool - ideally approx 0.01" (0.3mm) at 0.39" (10mm) centers. Once spread, the adhesive should remain "wet" and workable for approximately 20 minutes but this does depend in part on the absorbency of the materials involved. If in doubt, a test area is advised. Only cover an area which can be finished within this timeframe. Press the floor covering firmly into place. Remove traces of wet adhesive with a damp cloth.|
|Coverage||180 sq. ft. per gallon|