Select a Color
Simply select A, B, or C to choose your perfect color.
- AChoose an ECOS or Lullaby color by name
- BBrowse our collections
- CRequest a color match
Color Match
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
Lullaby Colors
Curated Collections
The expansive, dramatic skies add saturation to the wide-ranging palette.
The warmth of the palette also reflects the flowering hues of springtime.
From the deep blues of the mountain ranges to the brightly colored flora and fauna, this ecoregion also boasts highly saturated primary colors.
The warms and cools of this palette are uniformly vibrant and saturated.
This set of nine neutral colors is meant to complement the other palettes.
ECOS Colors
Do I Need A Primer?
Some colors, especially yellows, reds and oranges, and other dark accent colors, are considered by the paint industry to be “poor hiding” colors. That means they usually need a primer because, despite their strong, vibrant color, they’re not good at hiding the color they’re covering.
Using a grey or tinted primer can help you avoid having to apply multiple coats of paint to get the color you want. A tinted primer will help prepare the existing surface for your color. After that, you’ll typically only need to apply two coats of paint to get that perfect result.
At ECOS, we can help you tell which colors need a primer. Click here to print a zig-zag patterned paint card you can use to test your paint sample. Apply two coats of paint over the pattern. If you can still see the pattern through the paint, you’ll get better results if you use a grey or tinted primer under your color.
Painting Tips to Improve “Hide"
- Always choose a high-quality paint like ECOS.
- If you have multiple cans of the same color, combine them before you start to paint.
- Always stir paint thoroughly before painting.
- Don’t thin or dilute the paint with water.
- Use the correct primer as described above, or when you’re applying paint over a porous surface.
- Don’t spread the paint too thinly or unevenly.
- Allow the recommended drying time between coats.
- Always use high-quality brushes, rollers, and other tools.
Gloss Pet Dwellings Paint
-
Gloss Pet Dwelling Paint is a high sheen, protective finish that dries to a hard, durable film. Ideal for interior/exterior applications including dog houses and other enclosures. Suitable for primed or previously painted metal and wood. Odorless, non-toxic, and VOC-free.Not suitable for areas that are permanently wet....More Details
- Shipping Estimate
- Product Questions
- FAQs
Steps to Purchase
Colors on screen do not necessarily provide an accurate representation. Getting a sample or free chip is recommended prior to ordering.
2) Choose Quantity: Calculate Coverage
3) Add to Cart:
-
$0.00
ECOS Pet Dwellings gloss paint is a high sheen, protective finish that dries to a hard, durable film. Ideal for exterior applications including dog houses and other enclosures. Suitable for primed or previously painted metal and wood. Suitable for interior and exterior use. Not suitable for areas that are permanently wet.
Perfect for reptile enclosures, bird cages and kennels.
- ✔ Zero VOC1
- ✔ No Odor2
- ✔ Non-Toxic3
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
- 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.
Gloss Pet Dwellings Paint
Add all surfaces to be painted then remove openings, like doors and windows
Coverage Calculator
| Product Label | |
| Preparation | Surfaces should be clean, dry, sound, and free from dirt, dust, grease, and loose or flaking material. Clean stubborn areas with mild detergent. Rinse and dry thoroughly before painting. |
| Application and Clean Up | Under most conditions thinning is not necessary. Stir gently before and during use. Intermix if using multiple containers to ensure color uniformity. Apply two coats to pre-painted or primed surfaces and allow to dry for at least four hours before recoating. Typically dries to the touch in one hour and can be recoated in two. Hardening continues for up to thirty days. Avoid wetting, or scuffing during this period. Can be applied using a good quality synthetic brush; or rolled using a shed resistant 3/8"-1/2" roller cover. Avoid applying below 50oF. |
| Coverage | 500 sq. ft. per gallon |
| Recommended coats | 2 |
| Product Code | 700355464266 |