Search for a color in our collections
Or browse colors below
Nature's Palette Colors
The expansive, dramatic skies add saturation to the wide-ranging palette.
The warmth of the palette also reflects the flowering hues of springtime.
From the deep blues of the mountain ranges to the brightly colored flora and fauna, this ecoregion also boasts highly saturated primary colors.
The warms and cools of this palette are uniformly vibrant and saturated.
This set of nine neutral colors is meant to complement the other ECOS System palettes.
ECOS Classic Colors
ECOS Original Colors
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
Strong-bonding primer ideal for trim, furniture, cabinets, and other interior/exterior woodwork.
- Product Code: 700355463955
- Availability: In Stock
ECOS wood primer is ideal for use on interior and exterior bare woodwork. It provides a suitable bonding surface for paint and adds an extra layer of protection to your floor. Priming a floor is highly recommended, especially if it's not waterproof, can't be cleaned, or made of porous materials. Our wood primer ensures that your floor is sealed and protected. Before you paint your floor, make sure it's primed with ECOS premium interior wood primer.
- ✔ Zero VOC1
- ✔ No Odor2
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
|Preparation||Surfaces should be clean, dry, sound, and free from dirt, dust, grease, and loose or flaking material. Clearn stubborn areas with mild detergent. Rinse and dry thoroughly before painting. Soft or crumbly substrates should be pre-treated.|
|Application and Clean Up||Under most conditions thinning is not necessary. Stir gently before and during use. Intermix if using multiple containers to ensure color uniformity. Generally only requires one coat. Sand lightly between coats as this product may raise the grain of the wood. Normally dries to the touch in one hour. Allow four hours before sanding or painting. Can be applied using a good quality synthetic brush; or rolled using a shed resistant 1/4"-3/8" roller cover. Avoid applying below 50oF.|
|Coverage||400 sq. ft. per gallon|