ECOS Solid Color Concrete Sealer | ECOS Paints
Explore our NEW designer color collection | Shop Lisa Tharp Colors
  • Solid Color Concrete Sealer

Solid Color Concrete Sealer

    Solid Color Concrete Sealer is a water based medium sheen, solvent free water repellent. Effective for use on concrete, masonry, brickwork and plaster, this stain will shed water and mud also protects against many stains. Recommended for application on walls, flooring, patios, walkways and concrete decking. Odorless, non-toxic, and VOC-free. Not recommended for garages....More Details

    • Shipping Estimate
    • Application Instructions
    • FAQs

  • Product Code: 700355464334
  • Availability: In Stock

 Steps to Purchase

(Click below to select)

Colors on screen do not necessarily provide an accurate representation. Getting a sample is recommended prior to ordering.

I've ordered this color before
2) Choose Quantity: 
$64.95 / Each
  • $0.00

3) Add to Cart: 

ECOS Solid Color Concrete Sealer is an acrylic based tinted, medium sheen, solvent-free water repellent, effective for use on concrete, masonry, brickwork, and plaster. ECOS Solid Color Concrete Stain will shed water and mud and protects against many stains. Recommended for application on walls, flooring, patios, walkways and concrete decking. Not recommended for garages.

  • ✔ Zero VOC1
  • ✔ No Odor2
  • ✔ Non-Toxic3


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
  • 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

Solid Color Concrete Sealer

Typical coverage per gallon:
300 sq. ft.
Recommended coats:

Add all surfaces to be painted then remove openings, like doors and windows

Coverage Calculator

Surface 1
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, grease, glue, flaking pieces, sealers, curing and release compounds, or contaminants. Repair any cracks, holes, or imperfections where water can enter. Make sure that patching compounds will not show through the coating. New concrete must first cure for 28 days until the pH has stabilized. All concrete (new or old) must be etched sand/water blasted, or deep cleaned first – any residual liquid must be completely removed and the concrete allowed to dry thoroughly before sealing. Always spot test on an inconspicuous area to ensure satisfactory results and color.
Application and Clean Up Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50oF. Clean the area immediately prior to application. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 4 to 6 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not apply if rain is anticipated within 12 hours of application. Light foot traffic possible after one hour, heavy traffic after 72 hours. Clean application tools with warm soapy water. When working with more than one can, we recommend mixing together the contents of the cans to ensure color consistency. Apply with a high quality synthetic bristle brush, or roll with a shed resistant ½” – ¾” roller cover, or apply using an airless sprayer with a 0.013” to 0.015” tip at 1800 to 2500 psi. Cut in corners or edges with a bristle brush, then evenly apply with a roller over the remainder of the surface working in one direction. Do not overwork the product. Do not allow pooling. Maintain a wet edge to avoid lap marks. Two coats are recommended to achieve maximum performance and protection.
Coverage 300 sq. ft. per gallon
Recommended coats 2
Product Code 700355464334