ECOS Interior Gloss Varnish | ECOS Paints
Orders over $100 ship FREE / Staying at home? Skip the hardware store & add a painter's kit to your order
  • Interior Gloss Clear Varnish

Interior Gloss Clear Varnish

    ECOS Interior Gloss Clear Varnish is a high sheen, protective finish that dries to a hard, durable film - ideal for wood floors, window frames, doors, trim, and furniture, without the polyurethane odors and harmful fumes found in traditional products. Not recommended for oily woods such as Teak, Rosewood and Olive....More Details
    • Shipping Estimate
    • Application Instructions
    • FAQs

  • Product Code: 700355464235
  • Availability: In Stock

 Steps to Purchase

1) Choose Quantity: 
$39.95 / Each
$89.95 / Each
Purchase an un-tinted sample of this product here
2) Add to Cart: 

  • $0.00

Give your wood floor a glossy, clear look with help from ECOS Paints. ECOS Interior Gloss Clear Varnish is a high sheen, protective finish that dries to a hard, washable, durable film ideal for wood floors, window frames, doors, trim, and furniture. Not recommended for oily woods such as Teak, Rosewood, and Olive. ECOS Gloss Varnish is not only aesthetically pleasing but is also the perfect way to add an extra layer of protection. ECOS Varnishes are easy to apply, and don't have the harsh fumes typically found in traditional polyurethane products. If you need a product that will help protect your wood floor from scratches and stains, shop ECOS Gloss Varnish today.

  • ✔ Zero VOC1
  • ✔ No Odor2
  • ✔ Non-Toxic3

 


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
  • 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

Interior Gloss Clear Varnish

Typical coverage per gallon:
500 sq. ft.
Recommended coats:
3

Add all surfaces to be painted then remove openings, like doors and windows

Coverage Calculator

Height
Width
Surface 1
ft.
ft.
Total surface area:
0 sq. ft.
Add surfaces and calculate to get estimate
Product Label
Preparation Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, flaking pieces, or contaminants. Repair any cracks, holes, or imperfections. Sand the wood in the direction of the grain to obtain a smooth uniform surface. First use a medium-grade sandpaper (120 grit) working your way to fine-grade sandpaper (220 grit). Do not use steel wool. Wipe clean with a damp cloth to remove all sanding dust, and let dry thoroughly before applying the varnish. Always spot test on an inconspicuous area to ensure satisfactory results.
Application and Clean Up Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50oF. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Clean application tools with warm soapy water. For application on window frames, doors, trim and furniture: apply a thin coat of varnish using a high quality synthetic bristle brush, or foam brush. Do not allow the varnish to puddle, or over-brush the finish. Once dry, lightly sand the entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust. Apply a second coat. Allow 24 hours before light use. For application on wooden floors, use a lambswool or synthetic pad applicator, and maintain a wet edge to avoid lap marks. Apply three coats, sanding between coats. Avoid heavy traffic and replacing of furniture for 72 hours after the final coat. When replacing furniture, do not slide, and use felt protectors under table and chair legs to avoid scratching. Do not install rugs, or clean floors for seven days.
Maintenance To clean surfaces we recommend using warm water and a mild detergent. Do not use abrasive or harsh chemicals such as ammonia, vinegar, powdered all-purpose cleaners, Endust, Pledge, Murphy’s Oil Soap, any type of wax, or silicone based products. Do not steam clean. Do not allow water to stand on the floor for extended periods of time.
Coverage 500 sq. ft. per gallon
Recommended coats 3
Product Code 700355464235