WoodShield Interior Satin WoodStain Varnish | ECOS Paints
  • Interior Satin Tinted Varnish

Interior Satin Tinted Varnish

    Low-sheen, tinted finish to protect and color interior furniture, trim, cabinets, and other woodwork.
    More Details
  • Product Code: 817292027451
  • Availability: In Stock

Options

(Click to select)
Click here to view color comparison chart
$34.65 / Each
$79.95 / Each
How much do I need?
Purchase a 2oz sample of this product here

  • $0.00

WoodShield Interior Satin Tinted Varnish is a medium to low sheen, tinted, protective finish that dries to a hard, washable, durable film ideal for wood floors, window frames, doors, trim, and furniture. Not recommended for oily woods such as Teak, Rosewood, and Olive.
WoodStain Varnish is the simplest way to protect your floors, furniture or trim and contains 20% of the pigment formula of our WoodShield Wood Stain colors. In just three coats your woodwork will be beautifully tinted and protected.
ECOS WoodStain Varnish does not have the polyurethane odors and harmful fumes commonly found in traditional products, so you can apply it more safely. Invest in a quality varnish today.

  • ✔ Zero VOC1
  • ✔ No Odor2

 


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.

Interior Satin Tinted Varnish

Typical coverage per gallon:
500 sq. ft.
Recommended coats:
3

Coverage Calculator

Height
Width
Surface 1
ft.
ft.
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, flaking pieces, or contaminants. Repair any cracks, holes, or imperfections. Sand the wood in the direction of the grain to obtain a smooth uniform surface. First use a medium-grade sandpaper (120 grit) working your way to fine-grade sandpaper (220 grit). Do not use steel wool. Wipe clean with a damp cloth to remove all sanding dust, and let dry thoroughly before applying the varnish. Always spot test on an inconspicuous area to ensure satisfactory results.
Application and Clean Up Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50oF. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Clean application tools with warm soapy water. For application on window frames, doors, trim and furniture: apply a thin coat of varnish using a high quality synthetic bristle brush, or foam brush. Do not allow the varnish to puddle, or over-brush the finish. Once dry, lightly sand the entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust. Apply a second coat. Allow 24 hours before light use. For application on wooden floors, use a lambswool or synthetic pad applicator, and maintain a wet edge to avoid lap marks. Apply three coats, sanding between coats. Avoid heavy traffic and replacing of furniture for 72 hours after the final coat. When replacing furniture, do not slide, and use felt protectors under table and chair legs to avoid scratching. Do not install rugs, or clean floors for seven days.
Maintenance To clean surfaces we recommend using warm water and a mild detergent. Do not use abrasive or harsh chemicals such as ammonia, vinegar, powdered all-purpose cleaners, Endust, Pledge, Murphy’s Oil Soap, any type of wax, or silicone based products. Do not steam clean. Do not allow water to stand on the floor for extended periods of time.
Coverage 500 sq. ft. per gallon
Recommended coats 3
Product Code 817292027451

Shipping Estimate

Country:
Region / State:
Post Code: