WoodShield Wood Stain
  • Wood Stain

Wood Stain

    WoodShield Wood Stain is a water based, tinted, full bodied, solvent free, fast drying stain, ideal for wooden floors, window frames, doors, trim, and furniture. Available in several pre-mixed colors. ECOS WoodShield Satin clear Varnish does not have the harsh odors and harmful fumes commonly found in conventional products. Interior use only.
    More Details
  • Product Code: 700355464242
  • Availability: In Stock

Options

(Click to select)
Click here to view color comparison chart
$26.95 / Each
$49.75 / Each
How much do I need?
Purchase a 2oz sample of this product here

  • $0.00

WoodShield Wood stain is a tinted, full-bodied, solvent-free, fast drying stain, ideal for wood floors, window frames, doors, trim, and furniture. Available in many pre-mixed colors.

  • ✔ Zero VOC1
  • ✔ No Odor2

 


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.

Wood Stain

Typical coverage per gallon:
420 sq. ft.
Recommended coats:
1

Coverage Calculator

Height
Width
Surface 1
ft.
ft.
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, grease, glue, flaking pieces, or contaminants. Repair any cracks, holes, or imperfections. Sand the wood in the direction of the grain to obtain a smooth uniform surface. First use a medium-grade sandpaper (#120) working your way to fine-grade sandpaper (#220). Wipe clean with a damp cloth to remove all sanding dust, and let dry thoroughly before applying the varnish. Always spot test on an inconspicuous area to ensure satisfactory results and color.
Application and Clean Up Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50oF. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Clean application tools with warm soapy water. When working with more than one can, we recommend mixing together the contents of the cans to ensure color consistency. Apply stain in the direction of the wood grain using a clean, lint-free cloth, high quality synthetic bristle brush, a foam brush, or lamb’s wool applicator (for floors). Maintain a wet edge. Allow the stain to penetrate for no more than three minutes. Once the stain has been applied go over the same section with a clean lint-free cloth to remove any excess stain for an even color tone, wiping in the direction of the grain with an even pressure. Do not allow stain that has not penetrated the wood to dry on the surface. Any uneven color penetration can be blended. Rewet the surface with more stain and lightly rub the stain into the surface, blending light and dark areas. To darken color, apply a second coat after two hours, repeating the directions for application of the first coat. Do not sand between coats. After a minimum of three hours (dry time may be extended due to heavy application, low temperatures or high humidity), complete your project by applying a protective finish of ECOS WoodShield Varnish. For porous woods (such as Pine) apply WoodShield Wood Conditioner and allow to soak in for five minutes. This will help to ensure even stain color and reduce grain raising on soft and hard woods. Remove any excess Wood Conditioner with a clean cloth. For best results, wait 15-30 minutes before lightly sanding the surface with a fine-grade sandpaper. This will help smooth any raised grain. Remove all sanding dust.
Coverage 420 sq. ft. per gallon
Recommended coats 1
Product Code 700355464242

Shipping Estimate

Country:
Region / State:
Post Code: