Select a Color
Simply select A, B, or C to choose your perfect color.
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
The expansive, dramatic skies add saturation to the wide-ranging palette.
The warmth of the palette also reflects the flowering hues of springtime.
From the deep blues of the mountain ranges to the brightly colored flora and fauna, this ecoregion also boasts highly saturated primary colors.
The warms and cools of this palette are uniformly vibrant and saturated.
This set of nine neutral colors is meant to complement the other palettes.
ECOS Original Colors
Do I Need A Primer?
Some colors, especially yellows, reds and oranges, and other dark accent colors, are considered by the paint industry to be “poor hiding” colors. That means they usually need a primer because, despite their strong, vibrant color, they’re not good at hiding the color they’re covering.
Using a grey or tinted primer can help you avoid having to apply multiple coats of paint to get the color you want. A tinted primer will help prepare the existing surface for your color. After that, you’ll typically only need to apply two coats of paint to get that perfect result.
At ECOS, we can help you tell which colors need a primer. Click here to print a zig-zag patterned paint card you can use to test your paint sample. Apply two coats of paint over the pattern. If you can still see the pattern through the paint, you’ll get better results if you use a grey or tinted primer under your color.
Painting Tips to Improve “Hide"
- Always choose a high-quality paint like ECOS.
- If you have multiple cans of the same color, combine them before you start to paint.
- Always stir paint thoroughly before painting.
- Don’t thin or dilute the paint with water.
- Use the correct primer as described above, or when you’re applying paint over a porous surface.
- Don’t spread the paint too thinly or unevenly.
- Allow the recommended drying time between coats.
- Always use high-quality brushes, rollers, and other tools.
WoodShield Craft Stain is a water-based, tinted, full-bodied, solvent-free, fast drying stain, ideal for craft projects. Incorporating a top coat resin. The stain has a pleasant sheen and can be applied without needing a top coat. Available in several pre-mixed colors, without the harsh odors and harmful fumes found in conventional products....More Details
- Shipping Estimate
- Product Questions
- Product Code: 700355464242
- Availability: In Stock
Steps to Purchase
2) Choose Quantity: Calculate Coverage
3) Add to Cart:
WoodShield Craft Stain is a water-based, tinted, full-bodied, solvent-free, fast drying stain, ideal for craft projects. Incorporating a top coat resin, the stain has a pleasant sheen and can be applied without needing a top coat. Available in several pre-mixed colors. WoodShield Craft Stain does not have the harsh odors and harmful fumes commonly found in conventional products.
- ✔ Zero VOC1
- ✔ No Odor2
- ✔ Non-Toxic3
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
- 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.
Add all surfaces to be painted then remove openings, like doors and windows
|Preparation||Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, grease, glue, flaking pieces, or contaminants. Repair any cracks, holes, or imperfections. Sand the wood in the direction of the grain to obtain a smooth uniform surface. First, use a medium-grade sandpaper (#120) working your way to fine-grade sandpaper (#220). Wipe clean with a damp cloth to remove all sanding dust, and let dry thoroughly before applying the stain. Always spot test on an inconspicuous area to ensure satisfactory results and color.|
|Application and Clean Up||Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50ºF. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is up to one hour. Two coats are recommended for a good even finish. High humidity and cool temperatures may result in longer dry and recoat times. Clean application tools with warm soapy water. Apply stain in the direction of the wood grain using a clean, lint-free cloth, high-quality synthetic bristle brush, or a foam brush. Maintain a wet edge. Allow the stain to penetrate for no more than three minutes. Once the stain has been applied go over the same section with a clean lint-free cloth to remove any excess stain for an even color tone, wiping in the direction of the grain with even pressure. Do not allow stain that has not penetrated the wood to dry on the surface. Any uneven color penetration can be blended. Rewet the surface with more stain and lightly rub the stain into the surface, blending light and dark areas. To darken the color, apply additional coats, repeating the directions for application of the first coat. Do not sand between coats.|
|Maintenance||To clean surfaces we recommend using warm water and a mild detergent. Do not use abrasive or harsh chemicals such as ammonia, vinegar, powdered all-purpose cleaners, Endust, Pledge, Murphy’s Oil Soap, any type of wax, or silicone based products.|
|Coverage||400 sq. ft. per gallon|