Select a Color
Simply select A, B, or C to choose your perfect color.
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
The expansive, dramatic skies add saturation to the wide-ranging palette.
The warmth of the palette also reflects the flowering hues of springtime.
From the deep blues of the mountain ranges to the brightly colored flora and fauna, this ecoregion also boasts highly saturated primary colors.
The warms and cools of this palette are uniformly vibrant and saturated.
This set of nine neutral colors is meant to complement the other palettes.
Do I Need A Primer?
Some colors, especially yellows, reds and oranges, and other dark accent colors, are considered by the paint industry to be “poor hiding” colors. That means they usually need a primer because, despite their strong, vibrant color, they’re not good at hiding the color they’re covering.
Using a grey or tinted primer can help you avoid having to apply multiple coats of paint to get the color you want. A tinted primer will help prepare the existing surface for your color. After that, you’ll typically only need to apply two coats of paint to get that perfect result.
At ECOS, we can help you tell which colors need a primer. Click here to print a zig-zag patterned paint card you can use to test your paint sample. Apply two coats of paint over the pattern. If you can still see the pattern through the paint, you’ll get better results if you use a grey or tinted primer under your color.
Painting Tips to Improve “Hide"
- Always choose a high-quality paint like ECOS.
- If you have multiple cans of the same color, combine them before you start to paint.
- Always stir paint thoroughly before painting.
- Don’t thin or dilute the paint with water.
- Use the correct primer as described above, or when you’re applying paint over a porous surface.
- Don’t spread the paint too thinly or unevenly.
- Allow the recommended drying time between coats.
- Always use high-quality brushes, rollers, and other tools.
WoodShield Pre-Stain Wood Conditioner is a water based conditioner which promotes the uniform penetration of ECOS WoodShield Stain, particularly on porous woods. For use as the first step in a stain project, this conditioner reduces blotching, streaking, and grain raising to ensure an even stain color....More Details
- Shipping Estimate
- Product Questions
- Product Code: 700355464464
- Availability: In Stock
Steps to Purchase1) Choose Quantity: Calculate Coverage
2) Add to Cart:
WoodShield wood conditioner is designed to prevent stain blotching and streaking, and to ensure an even stain color. Ideal for softwoods such as poplar, maple, pine, and cherry.
- ✔ Zero VOC1
- ✔ No Odor2
- ✔ Non-Toxic3
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
- 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.
Click buttons below to download data sheets
Wood Conditioner Application InstructionsClick to download
Wood Conditioner SDSClick to download
Wood Conditioner CDPHClick to download
Wood Conditioner LEED v4Click to download
Add all surfaces to be painted then remove openings, like doors and windows
|Preparation||Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, grease, glue, flaking pieces, or contaminants. Repair any cracks, holes, or imperfections. Sand the wood in the direction of the grain to obtain a smooth uniform surface. First use a medium-grade sandpaper (#120) working your way to fine-grade sandpaper (#220). Do not use steel wool. Wipe clean with a damp cloth to remove all sanding dust, and let dry thoroughly before applying the stain. Always spot test on an inconspicuous area to ensure satisfactory results and color.|
|Application and Clean Up||Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50oF. Dries to the touch in 30 to 60 minutes. High humidity and cool temperatures may result in longer dry and recoat times. Clean application tools with warm soapy water. Apply in the direction of the wood grain using a clean, lint-free cloth, high quality synthetic bristle brush, a foam brush, or lamb’s wool applicator (for floors). Maintain a wet edge. Allow to penetrate for one to three minutes. Once the conditioner has been applied go over the same section with a clean lint-free cloth to remove any excess, wiping in the direction of the grain with an even pressure. Do not allow conditioner that has not penetrated the wood to dry on the surface. After 15 to 30 minutes, lightly sand the surface with fine-grade sandpaper (220 grit) to smooth any raised grain, then remove all sanding dust. The surface is now ready for staining with ECOS WoodShield Stain.|
|Coverage||220 sq. ft. per gallon|