Do I need a primer for this color?
Some colors, especially yellows, reds and oranges, and other dark accent colors, are considered to be “poor hiding” colors. That means they usually need a primer because, despite their strong, vibrant color, they’re not good at hiding the color they’re covering.
Using a grey (under dark colors) or tinted (under light colors) primer can help you avoid having to apply multiple coats of paint. A tinted primer helps prepare the existing surface for color. You’ll typically only need to apply two coats of paint over tinted primer to get that perfect result. ECOS colors that benefit from additional coats or a tinted primer are marked in our color library (select Fan Deck View) with a roller icon
Still trying to figure out if you need a primer? Click here to print a zig-zag patterned card you can use to test your paint sample.
Please note: this guidance is specifically related to color selection. We recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color, or if applying over bare or heavily sanded surfaces.
Painting Tips to Improve “Hide"

- Choose a high-quality paint like ECOS.
- Combine multiple cans of the same color before painting.
- Stir paint thoroughly before painting.
- Don’t thin or dilute the paint with water.
- Use the correct primer as described above, or when you’re applying paint over a porous surface.
- Spread the paint evenly and smoothly.
- Allow the full drying time between coats.
- Use high-quality brushes, rollers, and tools.
Exterior Satin Wall Paint
-
Exterior Satin Wall Paint is a medium sheen, strong bonding paint for exterior concrete, stone, brick, and wooden walls. Odorless, non-toxic, and VOC-free....More Details
- Shipping Estimate
- Application Instructions
- FAQs
Steps to Purchase
Colors on screen do not necessarily provide an accurate representation. Getting a sample or free card is recommended prior to ordering.
2) Choose Quantity: Calculate Coverage
-
$0.00
3) Add to Cart:
ECOS exterior satin wall paint is a medium sheen, protective finish that dries to a hard, durable film. Ideal for exterior walls, including stone, cinder block, brick, concrete and concrete siding. Not suitable for floors, or areas which are permanently wet.
- ✔ Zero VOC1
- ✔ No Odor2
- ✔ Non-Toxic3
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
- 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.
Click buttons below to download data sheets
EN71Click to download
Satin Wall SDSClick to download
Satin Wall Application InstructionsClick to download
Satin Wall (Dark Base) 8260BClick to download
Satin Wall (Light Base) 8260BClick to download
Satin Wall CDPHClick to download
Satin Wall Ingredients/DeclareClick to download
Satin Wall LEED v4Click to download
Exterior Satin Wall Paint
Add all surfaces to be painted then remove openings, like doors and windows
Coverage Calculator
Product Label | |
Preparation | Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. ECOS Paint is self-priming on most properly prepared surfaces, but we recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color. |
Application and Clean Up | Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50oF. For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water. |
Coverage | 390 sq. ft. per gallon |
Recommended coats | 2 |
Product Code | 700355463795 |
Select a Color
Simply select A, B, or C to choose your perfect color.
- AChoose an ECOS color by name
- BBrowse our colors
- CRequest a color match
Color Match
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
ECOS Colors










