Do I Need A Primer?
Some colors, especially yellows, reds and oranges, and other dark accent colors, are considered by the paint industry to be “poor hiding” colors. That means they usually need a primer because, despite their strong, vibrant color, they’re not good at hiding the color they’re covering.
Using a grey or tinted primer can help you avoid having to apply multiple coats of paint to get the color you want. A tinted primer will help prepare the existing surface for your color. After that, you’ll typically only need to apply two coats of paint to get that perfect result.
At ECOS, we can help you tell which colors need a primer. Click here to print a zig-zag patterned paint card you can use to test your paint sample. Apply two coats of paint over the pattern. If you can still see the pattern through the paint, you’ll get better results if you use a grey or tinted primer under your color.
Painting Tips to Improve “Hide"
- Always choose a high-quality paint like ECOS.
- If you have multiple cans of the same color, combine them before you start to paint.
- Always stir paint thoroughly before painting.
- Don’t thin or dilute the paint with water.
- Use the correct primer as described above, or when you’re applying paint over a porous surface.
- Don’t spread the paint too thinly or unevenly.
- Allow the recommended drying time between coats.
- Always use high-quality brushes, rollers, and other tools.
Select a Color
Pick one of our simple options to choose your perfect color.
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
Nature's Palette Colors
The expansive, dramatic skies add saturation to the wide-ranging palette.
The warmth of the palette also reflects the flowering hues of springtime.
From the deep blues of the mountain ranges to the brightly colored flora and fauna, this ecoregion also boasts highly saturated primary colors.
The warms and cools of this palette are uniformly vibrant and saturated.
This set of nine neutral colors is meant to complement the other ECOS System palettes.
ECOS Original Colors
Exterior Satin Wall Paint
Exterior Satin Wall Paint is a self-priming, medium sheen, strong bonding paint for exterior concrete, stone, brick, and wooden walls. Odorless, non-toxic, and VOC-free.
- Product Code: 700355463795
- Availability: In Stock
Steps to Purchase
2) Choose Quantity: Calculate Coverage
3) Add to Cart:
ECOS exterior satin wall paint is a self-priming, medium sheen, protective finish that dries to a hard, durable film. Ideal for exterior walls, including stone, cinder block, brick, concrete and concrete siding. Not suitable for floors, or areas which are permanently wet.
- ✔ Zero VOC1
- ✔ No Odor2
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
Exterior Satin Wall Paint
|Preparation||Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. ECOS Paint is self-priming on most properly prepared surfaces, but we recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color.|
|Application and Clean Up||Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50oF. For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water.|
|Coverage||390 sq. ft. per gallon|