ECOS Matt Wall & Ceiling Paint | ECOS Paints
  • Matte Paint

Matte Paint

    ECOS Matte Paint is a self-priming, low sheen, protective finish that dries to a hard, durable film. Perfect for ceilings & walls in bedrooms, living rooms, and other spaces without high humidity.
    More Details
  • Product Code: 700355463801
  • Availability: In Stock

Options

$27.95 / Each
$59.35 / Each
$271.75 / Each
How much do I need?
Purchase an un-tinted sample of this product here

  • $0.00

ECOS Matte Paint is a low sheen, protective finish that dries to a hard, durable film. Ideal for interior walls and ceilings in living rooms, dining rooms, and bedrooms, its low light reflectance lets it mask some flaws or imperfections on many substrates. Not recommended for high moisture environments such as kitchens or bathrooms, where ECOS Eggshell Paint is preferred.

  • ✔ Zero VOC1
  • ✔ No Odor2

 


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.

Matte Paint

Typical coverage per gallon:
560 sq. ft.
Recommended coats:
2

Coverage Calculator

Height
Width
Surface 1
ft.
ft.
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. ECOS Paint is self-priming on most properly prepared surfaces, but we recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color.
Application and Clean Up Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50oF. For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water.
Coverage 560 sq. ft. per gallon
Recommended coats 2
Product Code 700355463801

Shipping Estimate

Country:
Region / State:
Post Code: