Select a Color
Simply select A, B, or C to choose your perfect color.
- AChoose an ECOS or Lullaby color by name
- BBrowse our collections
- CRequest a color match
Color Match
Match another paint brand in our award-winning paint and pigments.
Enter your color match below
ECOS Colors



Do I Need A Primer?
Some colors, especially yellows, reds and oranges, and other dark accent colors, are considered by the paint industry to be “poor hiding” colors. That means they usually need a primer because, despite their strong, vibrant color, they’re not good at hiding the color they’re covering.
Using a grey or tinted primer can help you avoid having to apply multiple coats of paint to get the color you want. A tinted primer will help prepare the existing surface for your color. After that, you’ll typically only need to apply two coats of paint to get that perfect result.
At ECOS, we can help you tell which colors need a primer. Click here to print a zig-zag patterned paint card you can use to test your paint sample. Apply two coats of paint over the pattern. If you can still see the pattern through the paint, you’ll get better results if you use a grey or tinted primer under your color.
Painting Tips to Improve “Hide"

- Always choose a high-quality paint like ECOS.
- If you have multiple cans of the same color, combine them before you start to paint.
- Always stir paint thoroughly before painting.
- Don’t thin or dilute the paint with water.
- Use the correct primer as described above, or when you’re applying paint over a porous surface.
- Don’t spread the paint too thinly or unevenly.
- Allow the recommended drying time between coats.
- Always use high-quality brushes, rollers, and other tools.
Semi-Gloss Paint
-
Semi-Gloss Paint for trim and woodwork is a self-priming, medium sheen, hard wearing protective finish, ideal for all furniture, trim, cabinets, and other woodwork. As with all ECOS paints and other products, this semi-gloss paint is water-based. Odorless, non-toxic, and VOC-free....More Details
- Shipping Estimate
- Product Questions
- FAQs
Steps to Purchase
Colors on screen do not necessarily provide an accurate representation. Getting a sample or free chip is recommended prior to ordering.
2) Choose Quantity: Calculate Coverage
3) Add to Cart:
-
$0.00
ECOS Semi-Gloss paint is a self-priming, medium to high sheen, protective finish that dries to a hard, durable film. Ideal for interior walls & ceilings, trim, furniture, and other woodwork, such as cabinets.
- ✔ Zero VOC1
- ✔ No Odor2
- ✔ Non-Toxic3
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
- 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.
Click buttons below to download data sheets
EN71Click to download
Semi-Gloss SDSClick to download
Semi-Gloss Application InstructionsClick to download
Semi-Gloss ASTM D6886Click to download
Semi-Gloss LEED v4Click to download
Semi-Gloss CDPHClick to download
Semi-Gloss Ingredients/DeclareClick to download
Semi-Gloss HPDClick to download
Semi-Gloss (Dark Base) 8260BClick to download
Semi-Gloss (Light Base) 8260BClick to download
Semi-Gloss Paint
Add all surfaces to be painted then remove openings, like doors and windows
Coverage Calculator
Product Label | |
Preparation | Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. ECOS Paint is self-priming on most properly prepared surfaces, but we recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color. |
Application and Clean Up | Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50oF. For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water. |
Coverage | 400 sq. ft. per gallon |
Recommended coats | 2 |
Product Code | 700355463856 |
You may also be interested in...
Eggshell Paint
read more