ECOS Paints Anti-EMR Radiation Shielding Paint
  • EMR Shielding Paint

EMR Shielding Paint

    Extremely effective protection against ELF, VLF, and EMR radiation
    More Details
  • Product Code: 700355463610
  • Availability: In Stock

Options

$98.95 / Each
$374.95 / Each
How much do I need?
Purchase an un-tinted sample of this product here

  • $0.00

ECOS Interior EMR Shielding paint uses high-quality nickel to provide shielding against ELF, VLF, and EMR radiation. Having a dark grey color, it is intended to be over-painted by ECOS wall paint. This EMR shielding paint is suitable for use on primed walls, floors, and ceilings. Not only does it help protect against harmful radiation, it doesn't release traditional paint odors. If you're in the market for a dependable, long-lasting paint, choose ECOS interior EMR shielding paint today.

  • ✔ Zero VOC1
  • ✔ No Odor2

 


  • 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
  • 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.

EMR Shielding Paint

Typical coverage per gallon:
550 sq. ft.
Recommended coats:
2

Coverage Calculator

Height
Width
Surface 1
ft.
ft.
Total surface area:
0 sq. ft.

Add surfaces and calculate to get estimate
Product Label
Preparation Surfaces must be clean, dry and free of grease. Remove all loose and flaking material and, if previously wallpapered, remove all traces of paste and size. Prime bare plaster with ECOS Plaster Sealer, and bare sheetrock, with ECOS Wall Primer. This product can be painted directly onto wallpaper but this is not recommended as the product is intended to be a permanent structural feature. WARNING: Older buildings may contain lead-based paint, which requires professional remediation if it is disturbed. If in doubt, consult with a professional from a Lead-Safe Certified Firm.
Application and Clean Up READ ALL APPLICATION NOTES BEFORE COMMENCING. Do not thin. Stir gently and thoroughly before use. Apply in two medium coats with a 6 - 9" foam or short pile gloss roller, ensure the first coat is fully dry before recoating (minimum of 4hrs). Normally touch dry in 1-2 hours. Avoid temperatures below 41°F (5°C) and above 68°F (20°C). Once the ELF shielding wallpaint is dry it can be finished by over-coating with any of our wall paints and, once earthed, the shielding paint is activated against both high and low frequency radiations. If protection is needed against high frequencies only (microwaves, mobile telephone masts, etc.) then grounding is not necessary. However, for full shielding efficiency, it is essential that this product be earthed (grounded). This can easily be achieved as follows: 1. Turn OFF the power to all electrical circuits in the area. If in doubt about how to do this, consult a qualified electrician. 2. Loosen the screws of all the light switch and power socket panels. 3. When painting, extend the paint over the edge of the metal box behind the plate, as this should be grounded. 4. If boxes are plastic, a grounding wire should be extended to the edge of the box and this used as the grounding point for the paint. If in any doubt about how to use or apply this product, contact us for assistance
Coverage 550 sq. ft. per gallon
Recommended coats 2
Product Code 700355463610

Shipping Estimate

Country:
Region / State:
Post Code: